This series of machine tools are mainly used to undertake all kinds of turning work, it can turn all kinds of parts of the end, cylindrical, bore and metric thread, inch thread, modulus thread, diameter thread. Can be used on the turret to cut the taper alone, but also can be used on the knife with the vertical feed with the long taper motor. In addition can also bear the drilling, nesting, boring and other processes. The machine power, rigidity, and can use carbide cutting tools for thread cutting, to process a variety of ferrous metals and non-ferrous metals.
CW61125 / 10T is a base type product with a maximum turning diameter of 1250mm.
CW61140 / 10T is the base type heightening products, the maximum diameter of the bed is 1400mm.
CW61160 / 10T is a high size, the maximum diameter of the bed diameter of 1600mm。
ITEM | UNIT | CW61125 | CW61140 | CW61160 |
CAPACITIES |
Swing over bed | mm | 1250 | 1400 | 1600 |
Swing over carriage | mm | 865 | 1010 | 1210 |
Max.length of workpiece | mm | 3000 4000 5000 6000 8000 10000 12000 |
Max.turning length | mm | 2800 3800 4800 5800 7800 9800 11800 |
Pan of guideway | mm | 970 |
Max.cutting force | N | 45000 |
Max.weight of workpiece | kg | 10000 |
SPINDLE |
Dia.of spindle hole | mm | 130 |
Taper hole of spindle |
| Metric140 |
Range of spindle speeds | r/min | forward:3.15~315; reverse:3.5~291 |
No.of spindle speeds |
| forward:21; reverse:12 |
FEED |
Longitudinal and cross |
| 56 |
Range of feed motion | mm | longitudinal:0.1~12;cross:0.05~6; top siide:0.025~3 |
No. and range of metric thread |
| 44;1~120 |
No. and range of inch thread |
| 31;28~1/4 |
No. and range of module thread |
| 45;0.5~60 |
No. and range of dia. thread |
| 38;1/2~56DP |
TURRET |
Max.travel of cross slide | mm | 650 |
Max.travel of top slide | mm | 300 |
Section of tool shank | mm | 45(260x260) |
Tool post swing range | ° | ±90° |
Rapid of tool post | mm/min | Longitudinal:3740;cross:1870;top slide:935 |
Max.travel of tool post | mm | 2900 3900 4900 5900 7900 9900 11900 |
TAILSTOCK |
Dia. of tailstock | mm | 220 |
Travel of tailstock quill | mm | 300 |
Taper hole of tailstock quill |
| morse 6 |
OTHERS |
Main motor power | kw | 22 |
Length | mm | 6020 7020 8020 9020 11020 13020 15020 |
Width | mm | 1995 |
Height | mm | 2175 2325 2525 |